Lowongan Oil and gas

An Established Oil Company (PSC) in Indonesia is searching a qualified candidates for: Production Operator (Oil/Gas Company) (Work Schedule – Rotational – 14 day work shifts with a nominal 12 hour work day.) Skills Required:  • Min Diploma 3 degree in Chemical or related engineering degree • Minimum 5 years operating in the Petrochemical, oil, and gas, LPG, LNG or related industry. • Strong Safety and Environment awareness. • Effective communicator at all levels, fluent in English oral and written. • Comprehensive in understanding diverse field operations activities. • Ability to assist the level 2 operator train and develop new operator recruits. Key Activities:  • Participates in all Company HSE programs as required, including STOP, PTW and member of the Emergency Response Team if requested. • Monitoring of process facilities. • Start up and Shutdown of process facilities following procedures. • Taking of and analyzing readings of process and equipment. • Isolating and de-isolating the process and equipment for maintenance activities. • Regular monitoring of ongoing maintenance activities on process plant and equipment, perform detailed trouble shooting. • Liaise with control room operator to ensure daily production targets are met. • Maintain good housekeeping of process area, ensuring zero discharge to the environment. • Carry out Preventive Predictive Maintenance (PPM) and Corrective Maintenance (CM) as requested. • Taking of process samples as requested. • Monitoring consumable material and chemical stocks. • Planning and prioritizing daily / weekly tasks. • Receiving and giving oral / written handovers at shift change. • Take lead part in reviewing to process procedures towards offering improvements. • Involvement with line supervisor on problem solving with process and equipment upsets. • Involvement in decision making on operational issues. Electrical Technician (Oil/Gas Company) (Work Schedule – Rotational – 14 day work shifts with a nominal 12 hour work day.) Job Role:  Operation, maintenance, and troubleshooting of Power Generation, Distribution, and Utilization equipment to 15kV: • Hazardous Area Electrical Wiring and Equipment maintenance. • Gas Turbine and Diesel Engine driven power generators. • UPS systems for critical non-interruptible loads. • Medium and Low Voltage Switchgear. • Medium and Low Voltage Motor Controls. • Transformers both Oil-Filled and Air. • Medium and Low Voltage Motors. • Stationary Battery Systems and Chargers. • Vessel and Platform Navigational Aids. • Domestic and Portable Electrical equipment and appliances. • Lighting and Small Power systems. • HVAC equipment maintenance. • Read and understand technical drawings, literature, and specifications. Qualifications:  • Minimum 5 years operating in the Petrochemical, oil, and gas, LPG, LNG or related industry. • Minimum D3 degree in Electrical Graduate. • Computer Literate. Able to operate PC (MS Word, MS Excel, etc.) • English Speaking. Able to read, write, and speak. • Advanced DC and AC Electrical Theory and Troubleshooting • Advanced Electric Motor and AC Generator Theory and Troubleshooting • Advanced Power Electronics Theory and Troubleshooting • Basic PLC operation, maintenance, and troubleshooting. • In – depth knowledge of industrial electrical systems with emphasis on technical theory, maintenance, electrical testing, and troubleshooting. • Knowledge of industrial electronics and process control systems. • Experience with gas turbine and diesel engine driven parallel generator systems. Instrument Technician (Oil/Gas Company) (Work Schedule – Rotational – 14 day work shifts with a nominal 12 hour work day.) Job Role:  • Participates in all Company HSE programs as required, including STOP, PTW and member of the Emergency Response Team if requested. • Work with Field Operator in Isolating and de-isolating instrument and system equipment for maintenance activities. • Perform trouble shooting on instrument and system related problems, working with operations department. • Maintain good housekeeping in work areas, ensuring zero discharge to the environment. • Carry out Preventive Predictive Maintenance (PPM) and Corrective Maintenance (CM) as requested. • Monitoring consumable materials. • Planning and prioritizing daily / weekly tasks. • Receiving and giving oral / written handovers at crew changes. • Takes an active role in the inspection of instrument equipment, understands the means for safely isolating instrument related equipment. • Involvement in calibrating test equipment and ensures calibration documentation is recorded. • Knowledge of the MOC process and understands the requirements of when to raise an MOC. • Knowledge and understanding of the SAP Maintenance Management system for sourcing spare parts and retrieving work orders. • Works with Vendors carrying out maintenance activities. • Participates in the preparation of Permit to Work, and associated certificates. • Participates in maintenance associated Risk Assessment where required • Required to train up to Supervisor Position to be able to stand –in when requested. Qualifications:  • Minimum 5 years operating in the Petrochemical, oil, and gas, LPG, LNG or related industry. • Minimum D3 degree in Electrical Graduate. • Experience in Control Systems, PLC and Fire & Gas detection. • Experienced in calibrating test equipment. • Strong Safety and Environment awareness. • Effective communicator at all levels, fluent in English oral and written. • Ability to mentor and give guidance to other Instrument personnel, assisting them through their levels of competency in the competency program. • Ability in developing maintenance procedures. Mechanical Technician (Oil/Gas Company) (Work Schedule – Rotational – 14 day work shifts with a nominal 12 hour work day.) Job Role:  • Participates in all Company HSE programs as required, including STOP, PTW and member of the Emergency Response Team if requested. • Monitoring of rotating and stationary equipment. • Start up and Shutdown of process rotating equipment with Field Operator following procedures. • Taking of and analyzing readings of rotating equipment. • Perform minimum trouble shooting on rotating equipment. • Maintain good housekeeping in area of work and in workshops, ensuring zero discharge to the environment. • Carry out Preventive Predictive Maintenance (PPM) and Corrective Maintenance (CM) as directed to meet production objectives whilst complying with company guidelines. • Monitoring consumable material. • Planning and prioritizing daily / weekly tasks. • Act in a proactive manner to reduce unnecessary work and forward any improvement suggestions. • Works with the Field Operators in planning isolations for maintenance work. • Works with Vendors carrying out maintenance activities. • Participates in the preparation of Permit to Work, and associated certificates. • Participates in maintenance associated Risk Assessment where required • Required to train up to Mechanical Supervisors Position to be able to stand –in when requested Skills Required:  • Minimum 5 years operating in the Petrochemical, oil, and gas, LPG, LNG or related industry. • Minimum D3 degree in Mechanical Engineering • Experience in Mechanical Rotating Equipment maintenance. • Experienced with Gas Turbines, Compressors and Pumps • Experienced in Conditioning Monitoring Programs. • Knowledge in HVAC systems • Strong Safety and Environment awareness. • Ability to work on own initiative and within a team • Ability to follow a plan, read and follows manuals, and asks for guidance when required. • Personal motivation and self learning ability. • Effective communicator at all levels, fluent in English oral and written. • Ability to mentor and give guidance to other mechanical personnel, assisting them through their levels of competency in the competency program. • Ability in developing maintenance procedures. Send CV only (word format) to: indonesia@fircroft.com